3105 aluminum sheet is a typical deep-drawing material with an Al content of up to 98%, good rust resistance, and good electrical conductivity up to 41%.
3105 grade
600-2650mm
0.1-500mm
hot rolled ( DC ), cold rolling ( CC ), cast
ASTM B209, GB/T 3880, EN AW, DIN, MSRR, AMS, JIS, AISI, BS etc
acceptable ( OEM, ODM etc )
Qingdao, Shanghai, Guangzhou etc China main port
GB/T19001-2016/ISO9001:2015, CE, SGS etc
Cap Material. Due to the excellent deep-draw ability of 3105 aluminum sheets, it satisfies the design requirements of
different bottle mouths of wine products.
Mobile Homes, Residential Wall Panels. 3105 aluminum steel plate is used as a wall, even in a very humid environment,
such as an island,
it can easily form a dense alumina protective film on the surface, which has strong corrosion resistance. If the film
surface is scratched and damaged, new films can also be produced quickly.
Other Usages. Color coated aluminum substrate, rain gear, lamp holder, shutters, etc. Anodized 3105 aluminum sheet, the
surface can be coated with rich colors, so that the lighting fixtures, rain gear, and other products have a rich design
sense, and do not change color for a long time.
3003 aluminum metal plate is an alloy plate commonly used in 3000 series aluminum plates. Other alloys in this series
include the following:
3003 aluminum sheet
3004 aluminum sheet
3005 aluminum sheet
3104 Aluminum Sheet
3105 aluminum sheet
3A21 Aluminum Sheet
It is not hardenable by heat treatment and it has good corrosion resistance, formability and weldability.
3105 aluminum sheet with 98% pure aluminum and slight alloy additions for strength. 0.3% of copper is added to 3105
aluminum sheet, so the conductivity turns out to be 41%. For its contents and processing technologies, 3105 aluminum
sheet is light in weight and it has semi-smooth surface. Besides, it is not hardened by heat treatment.
Mg, Mn and Si are added to 3105 aluminum sheet, thus, it has excellent correction resistance, formability and welding
characteristics. Besides, it has average mechinability and it can be increased in harder tempers than in annealed
condition.
Both 3105-H14 aluminum and 3105-H24 aluminum are variants of the same material. They share alloy composition and many
physical properties, but develop different mechanical properties as a result of different processing.
3105-H24 aluminum is 3105 aluminum in the H24 temper. To achieve this temper, the metal is strain hardened, and then
partially annealed, to a strength that is roughly halfway between annealed (O) and full-hard (H28).
3105 aluminum has slightly higher strength than 3003 aluminum, others properties are similar to 3003 aluminum alloy,
good conductivity, electrical conductivity can be up to 41%.
Aluminum alloy 3105 is essentially a 98% aluminum alloy with minor additions to increase strength over that of alloy
1100 and 3003.
Aluminum 3105 alloy has good forming characteristics. It is suggested that bend radii should be used in one thickness to
2 t range for annealed H12, H14 and H16 tempers. Bend radii of 2 to 7t should be used for the H18 temper.
6061 aluminum sheet alloy is strong, easily machined, and weldable. Aluminum 6061 T6 alloys are doubled the strength of
aluminum 6063 alloys.
T651 temper has similar mechanical properties. The famous Pioneer plaque was made of this particular alloy.
Order 6061 Aluminum Sheets in 6061 Aluminum in small quantities and no minimums of all Aluminum 6061 at HWALU aluminum.
It is suitable for painting/coating and is commonly used for sign making, residential siding, mobile homes and in sheet
metal work.
We offer 3105 painted aluminum sheet in pre-cut sizes from 12” x 48” up to 48” x 96”, with a variety of colors
available.
Note: White on both sides and has a removable protective film on one side.
The forming characteristics of 3105 aluminum sheet are pretty good . 3105 aluminum sheet does not respond to heat
treatment except for annealing during cold working. The cold working characteristics are very good, even in the harder
cold working tempers. For all the features above, 3105 aluminum sheet has a vast application in many field.
Deep Drawability. The deep drawing performance of 3105 aluminum sheet in O temper better than that of H26 temper, and
the deep drawing performance of 3105 aluminum alloy sheet before low temperature treatment is better than that of 24h.
Plasticity. 3105 aluminum sheet has high plasticity in the annealed state, and its plasticity is good when it is
semi-cold-work hardened, and it is low when it is cold-work hardened.
Solderability. It is worth mentioning that the excellent weldability of 3105 aluminum sheet is applicable to all
existing welding technologies, of which arc welding is the best method.
Other Characteristics. Good corrosion resistance, good anodic oxidation, poor machinability, etc. There are other
characteristics corresponding to 3105 aluminum sheet applications, don’t hesitate to click online customer service for
free consultation!
Shipping methods: Express, sea freight, air cargo, land transportation, postal etc
Sample service: we can provide samples, and the samples are free.
Henan Huawei Aluminum Co., Ltd. is the leader of many aluminum manufactures and suppliers in China. We strictly control the quality and focus on customers. We hope to have in-depth cooperation with you and provide you with high quality aluminium material products custom OEM services. If you want to import and get the newest and best prices by per kg or per ton standard weight, please contact us.
| Material | Temper | Tensile Strength (N/mm²) | Yield Strength (N/mm²) | Elongation on 50mm | |||
| 0.5 mm | 0.8mm | 1.3mm | 2.6mm | ||||
| 3105 | 0 | 110-155 | – | 16 | 18 | 20 | 20 |
| 3105 | H12 | 130-175 | 115 | 2 | 3 | 4 | 5 |
| 3105 | H14 | 160-205 | 145 | 2 | 2 | 3 | 4 |
| 3105 | H16 | 185-230 | 170 | 1 | 1 | 2 | 3 |
| 3105 | H18 | 215 min | 190 | 1 | 1 | 1 | 2 |
| Alloy Temper | Specified thickness | Tensile strength | Yield strength | Elongation |
| (inches) | (KSI) | (KSI) | (%) | |
| 3105 (annealed) | 0.013-0.019 | 96-145 | Min34 | 16 |
| 0.020—0.031 | 8 | |||
| 0.032-0.080 | 20 | |||
| 3105-H12 | 0.017-0.019 | 131-179 | Min103 | 1 |
| 0.020-0.031 | 1 | |||
| 0.032-0.050 | 2 | |||
| 0.051-0.080 | 3 | |||
| 3105-H14 | 0.013-0.019 | 152-200 | Min124 | 1 |
| 0.020-0.031 | 1 | |||
| 0.032-0.050 | 2 | |||
| 0.051-0.080 | 2 | |||
| 3105-H16 | 0.013-0.031 | 172-221 | Min145 | 1 |
| 0.032-0.050 | 2 | |||
| 0.051-0.080 | 2 | |||
| 3105-H18 | 0.013-0.031 | Min193 | Min165 | 1 |
| 0.032-0.050 | 1 | |||
| 0.051-0.080 | 2 | |||
| 3105-H25 | 0.013-0.019 | Min15 | Min131 | 2 |
| 0.020-0.031 | 3 | |||
| 0.032-0.050 | 4 | |||
| 0.051-0.080 | 6 |
5005 aluminum sheet belongs to 5-series Al-Mg alloy, but the content of the main alloy Mg is less than that of other 5-series alloy sheets, so it has a slightly higher corrosion resistance.
Detials >>
5083 aluminum sheet belongs to Al-Mg series alloy. It is the highest strength corrosion-resistant alloy among practical non-heat-treated alloys. And It is suitable for welding structures.
Detials >>
1100 aluminum sheet is one of the representatives of 1 series pure aluminum sheet, which is used for industry. It is not difficult for us to find the last two Arabic digits 00 in grade 1100.
Detials >>
